VIP-V, NLV, NXA, NXV, NLX Series

• Common motor-pump shaftVertical multi-stage centrifugal pumps with axial impellers. Mechanical seal.

  Monobloc configuration with stainless steel shaft motor.

  Equipped with threaded flanges. Supplied with set of counterflanges, screws and gaskets.

  The discharge body can be oriented in four positions.

  Characteristics:

• Quiet operation
• Liquids without abrasive elements

Engines:

• A induction asynchronous type with external ventilation 2 poles at 50Hz 2900 RPM
• Insulation type F, protection IP-55, continuous duty S1
• Three-phase at 230/400V
• Single-phase 230V 50Hz permanent capacitor starting with built-in thermal protection.
• On request:

• Special voltages and frequencies.
• Special mechanical seals.

• Suction body in cast Ho GG25
• External jacket in stainless steel AISI 304
• Impellers in stainless steel AISI 304 radial type
• Glass reinforced Noryl diffusers
• Asp. and imp. body in cast Ho GG25
• Shaft Stainless steel AISI 420
• Mechanical seal: Graphite/ceramic
• Seal : EPDM

Applications:

• Hydropneumatic pressure equipment
• Pressure Washing
• Pressure Washing
• Garage washing
• Industry
• Agriculture
• Etc
• Maximum temperature of the liquid : 50º C.

Engines:

• Electric motors of 2900 RPM, 50 Hz.
• Insulation class F. Protection IP55.
• Three-phase: 230/400V or 400/690V.
• Constructive form according to the table of dimensions.

Model: NLV 62 – NLV 76 – NLV 82

• Imperial Aspiration Body: GG25
• Impellers: GG-25 with bronze option.
• Diffusers: GG-25
• Shaft Stainless steel AISI 420
• Seal: EPDM

• Suitable for pumping clean water
• Operating pressure 11 bar. max.
• Liquid temperature : 50ºC max.
• 2 poles at 50 Hz (2,900 rpm)
• Insulation type F, protection IP-55, continuous duty S1
• Three-phase 230 / 400 V 50 Hz
• Single-phase 230 V 50 Hz
• Permanent condenser starting with built-in thermal protection
• On request: 

• Special Voltages and Frequencies
• Special mechanical seals
• Calderín of 25 l. and 50 l.
• Pressure regulator Flumatic, Flucontrol and Varivip

• Impeller in stainless steel AISI 304 radial type
• Graphite/ceramic mechanical seal
• Suction body in cast Hº GG-25
• Diffusers in fiberglass reinforced noryl
• Monobloc configuration with stainless steel shaft motor.
• Equipped with threaded jaws
• A induction asynchronous type with external ventilation

• Maximum temperature of the pumped liquid: 120° C.
• Pump shaft attached to the motor shaft.
• Electric motors of 2900 RPM, 50Hz.
• Insulation class F.
• IP55 protection.
• Single-phase: 230V, Three-phase: 230/400V or 400/690V.

NLX 3-5-10-15-22-33-46-66-92-125

• Diffuser AISI-316
• Impeller AISI-316
• EPDM seal
• Pump shaft AISI-316
• Asp. bodies – imp. AISI-316