Standard Monoblock Pumps GNI Series

• Monoblock group with standard pump according to EN733 – Ex DIN 24255
• Flow rates up to 1500 m3 /h.
• Pressures up to 100 mts.
• Power up to 100 hp. 74 kw.
• Speed : 1450 and 2900 RPM.
• Operating data according to ISO 9906.
• Standardized electric motors according to EN 60034 / DIN VDE 0530 / IEC 34-72 / IE-3 asynchronous type with squirrel cage rotor, IP 55, and insulation class F.
• For continuous operation S1 at nominal power.
• Maximum ambient temperature 40ºC.

• Pump body, impeller, closing rings, body cover and support cover in cast iron.
• Pump shaft in stainless steel 13 % Cr.
• The standard version with standard mechanical seal according to DIN 24960 is suitable for lifting liquids with temperatures up to 100 °C.
• B5 motors for sizes up to 132.
• B35 motors for larger sizes.

Optional

• Pump body bronze/Inox
• Bronze impeller
• Axle steel AISI 316
• With special mechanical seal it can work up to 160 ºC
• Possibility of incorporating special motors for explosive atmosphere, marine environment, tropical climate, etc.